How to make a Spade Connector to Crocodile Clip Cable for Lead Acid Battery

In this post, I will show you how to make your own custom Spade Connector to
Crocodile Clip Cable which will help in connecting your lead-acid batteries to your
projects.

Video

     You can also watch the video on how to make the cable

Things & Components you need

• 2 * Spade Connectors
• 2 * Crocodile Clips
• 1 * Wires (my wire is from an old charger)

Making

First, remove the protective cover of the wire on the edges to expose the bare wire

Now connect the wire to the Spade Connector using solder

Once the wire & spade connectors are connected, cover the exposed parts
with a heat sink tube.

Now on the other end connect the Crocodile clip to the wire & enclose the
clip with its cover.

Once everything is done do a connectivity test, if everything is fine then you are
good to go.

Thank you for reading !!!